As one of the most formal documents you can send, a letter conveys a high degree of respect to its recipient. Sending a letter is your way of saying that the recipient matters. Letters are usually one- to two-page documents sent to people or organizations outside of the organization from which they’re sent, whereas memos are equivalent documents for formal communications within an organization (see §4.2 ).

There are two main types of letters: block-style letters and modified-block style. The block style used by organizations has a company letterhead at the top, whereas modified-block letters are typically written independently by individuals. Though you may see minor format variations from company to company, letters have 10-12 major parts, each of which we’ll examine for the conventions that, if followed, show that you are able to write to a high standard of formality should the occasion call for it.

Before delving into this in detail, however, let’s review the advantages, disadvantages, and occasions for choosing letters during the channel selection process.

Table 8.3 Excerpt: Letter Pros, Cons, and Proper Use

8.3.1: Return Address or Company Letterhead

The first piece of information in a letter is usually the sender’s address. In block-style letters, the address appears as part of the company letterhead in the header, under or beside the prominently displayed and brand-stylized company name and logo. Use a company letterhead template whenever writing on behalf of the company you work for; never use it for personal messages (e.g., reference letters for a relative) not authorized by the company. The company letterhead address usually appears in the one-line style following the format given below:

See below for more on address styles. The letterhead also includes other contact information such as phone and fax numbers, as well as the company web address. Some company letterhead templates move some or all of these parts, besides the company name and logo, to the footer so that the whole page is framed with company branding. For dozens of letter template examples, go to open a blank new document in MS Word and type “letter” into the document type or go to Letters (Microsoft Office, 2021).

Figure 8.3.1: Selection of Microsoft Word business letter templates

Because modified-block-style letters are sent by individuals unaffiliated with a company, they typically include only the sender’s two-line address at the top, which divides the above address style in half so that the street number, name, and type go on the first line (with no comma at the end), and the city/town, provincial abbreviation, and postal code go on the second, as shown below:

In both styles of address, strike a formal tone by fully spelling out the street type rather than abbreviating it (e.g., Street, not St.; Avenue, not Ave.; Road, not Rd.; Crescent, not Cres.; Boulevard, not Blvd.; Court, not Crt.; etc.). However, using those abbreviations is fine in informal, personal letters.

A distinguishing feature of the modified-block style is that the sender address is justified (flush) to the vertical middle of the page (i.e., the left edge of its text lines up with it) rather than the left margin. Do this by highlighting the two address lines, then clicking and dragging the base of the left-margin tab in your word processor’s ruler right to the vertical midpoint of the page. If your page has 2.5cm margins, that would be at around the 8.25cm mark. Note that modified-block-style letters place the sender’s address on the first line below the header (i.e., about an inch or 2.5cm from the top edge of the page) and don’t include the sender’s name at the top of this address block. The reader can find the sender’s name by darting their eyes down to the signature block at the bottom.

In some circumstances, you may want to use block-style letters with a letterhead when writing on your own behalf rather than for a company. When writing a cover letter, for instance, you can stylize your name prominently as if it were the name of a company so that it stands out in a larger font in bold typeface, possibly in an eye-catching colour. Because this appears in the header margin, adopting the block style has the additional advantage of placing your name and contact information automatically on every page so that consistent personal branding extends to the one- to two-page résumé that follows, including the references page that would be separated out for confidentiality reasons (see the chapter on employment communication for more information).

Return to the Letter Parts menu

8.3.2: Date Line

In a formal letter, the date must follow the unambiguous style that fully spells out the month, gives the calendar date, a comma, and the full year (e.g., April 25, 2020). In block-style letters, this appears left-justified (its left edge lines up with the left margin) often with 2-3 lines of space between it and the company letterhead above it and, for symmetry, as much between it and the recipient address below.

In modified-block-style letters, however, the date often appears as the third line of the sender address block. Its left edge therefore lines up with the vertical middle of the page. Only one line of space should separate the date line from the recipient address below. After this, block-style and modified-block letters are formatted in the same way until you get to the signature block at the bottom.

Return to the Letter Parts menu

8.3.3: Recipient Address

No matter what style of letter you use, the recipient address is left-justified, begins with the recipient’s full name on the top line, and follows with their mailing address on the lines below in the format options given in Table 7.1.3 below.

Table 8.3.3: Standard Letter Address Format for Company and Personal Recipients

Notice that commas follow only (1) the recipient’s name if followed by a professional role (capitalized) or credentials abbreviation and (2) the city or town. Two spaces separate the provincial abbreviation (PA) from the postal code, which has a single space in the middle dividing the six alpha-numeric characters into two groups of three for readability. Though you sometimes see addresses that fully spell out the province, rather than abbreviate it, and have only one space between the province and postal code, the style given above is dominant and has the advantage of being more concise and clearly distinguishing the province from the postal code without crowding the line with commas. Keep the end of each line free of any punctuation.

Return to the Letter Parts menu

8.3.4: Subject Reference

Like a subject line in an email, letters can have subject lines that indicate the topic or purpose. The same titling principles as email apply, only the letter’s subject reference begins with “Re:” or “RE:” and is entirely in either bold typeface or all-caps, but not both. You might also see it positioned above or below the opening salutation, but usually above. Like all the text blocks besides the date line, a blank line of space separates this from the other parts above and below.

Return to the Letter Parts menu

8.3.5: Opening Salutation

The most common opening salutation for a letter is given in Table 7.1.5 below:

Table 8.3.5: Opening Salutation

The Dear, title, full name, and colon all signal formality. Variations in formal letters include omitting the title or the first name, but not both at once. Omit the title if you’re at all concerned about its accuracy. For instance, if the recipient’s first name is a unisex name and you’re not sure it the recipient is male or female, skip the gender title to avoid offending the recipient by assuming the wrong gender. Unless you’re sure that the recipient prefers Mrs. (indicating that she is married) over Ms. because she’s used it herself, Ms. might be the safer option. Avoid the title Miss because it’s no longer commonly used and appears outdated. If you’re addressing someone who identifies as non-binary, then Mx. might be best if you must use a title, or just no title at all. Other considerations in the opening salutation include the following:

• Using the recipient’s first name only is appropriate only if you know the recipient well and you are on a friendly, first-name basis.
• Using a comma instead of a colon is appropriate only for very informal letters.
• To whom it may concern: is an appropriate opening salutation only if you really intend for the letter to be read by whomever it is given to, as in the case of a reference letter that an applicant gives copies of to potential employers. Otherwise, every effort should be made to direct the letter to a particular person, especially cover letters. If an employer has deliberately omitted any mention of who is responsible for hiring an applied-for position, addressing the person by professional role (e.g., Dear Hiring Manager:) is acceptable (see the chapter on employment communication for more information).

Return to the Letter Parts menu

8.3.6: Message Opening

Letters can be used for both direct- and indirect-approach messages depending on the occasion for writing them. Direct-approach letters get right to the point by stating their main point or request in a paragraph of no more than a sentence or two. Letters organized with openings like this lend themselves to positive or neutral messages. Ideal for formally delivering bad-news or persuasive messages, indirect-approach letters begin with a buffer paragraph—again, this may only be a sentence or two—just to say some nice things before getting to the bad news or difficult request in the body of the message.

Return to the Letter Parts menu

8.3.7: Message Body

Whether the opening takes the direct or indirect approach, the body supports this with explanatory detail (see above on message bodies). Ensure that your message body abides by the 6 Cs of style, especially conciseness, because a letter should only be a page or two. If appropriate for the content, use effective document design features such as numbered or bulleted lists to improve readability. For instance, if your letter contains a series of questions, use a numbered list so that the reader can respond to each with a corresponding numbered list of his/her own.

Message body paragraphs should be proper three-part paragraphs. Like all other text blocks throughout (except for the return address above and signature block below in a modified-block letter), every line in the message body must be flush to the left margin, including the first. In other words, rather than indent a paragraph’s first line as novels do to mark where one paragraph ends and another begins, separate them with a blank line. Brevity in formal letters limits the number of paragraphs to what you can fit in a page or two.

Return to the Letter Parts menu

8.3.8: Message Closing

The closing mirrors the opening with a sentence or two meant to wrap up the letter with something relevant to the topic at hand. Because of their formality, letters almost always end with a goodwill statement, such as an expression of gratitude thanking readers for their attention or consideration. For instance, cover letters thank readers for their consideration, invite them to read the enclosed résumé, and express interest in meeting to discuss the applicant’s fit with the company in person, since getting an interview is the entire point of an application. A thank-you letter will thank the recipient again, and a recommendation letter will emphatically endorse the applicant. Even letters delivering bad news or addressing contentious situations should end with pleasant statements rather than hostile or passive-aggressive jabs.

Return to the Letter Parts menu

8.3.9: Closing Salutation

A simple Sincerely or Cordially are standard business letter closing salutations that signal the formal end of the message, much like the opening salutation signaled the beginning of the message proper. A more personal letter sent to someone you know well may end with Yours truly (with the second word all lowercase), but don’t use this with someone you’ve never met or with anyone you want to maintain a strictly professional relationship with. Always place a “hanging comma” at the end of the line, as you can see in Table 8.3.10 below.

Return to the Letter Parts menu

8.3.10: Signature

Your signature is a guarantee of authorship that carries legal weight. In a printed letter, leave enough space—usually about three single-spaced lines—to autograph your signature by hand. When sending a letter that you write and submit completely electronically, you have two options for an electronic signature, as explained in Table 8.3.10 below. Of the two, an image of your hand-written signature looks much more professional than a typed-out version using a simulated handwriting font. The hand-written image gives the impression that you are adept at technology.

Return to the Letter Parts menu

Table 8.3.10: How to Make Signatures for Electronically Written and Sent Letters

Don’t cut corners when assembling an image of your handwritten signature. For instance, taking a smartphone photo of your signature rather than scanning it will look amateurish because the background will probably be greyish or another off-white shade that will clash with the pure white of your page background. Also, drawing your signature with your computer’s mouse or touchpad will look shaky like it was signed by a seven year-old. The inserted signature image must be seamlessly integrated and smoothly drawn for it to look professionally done.

Besides giving the impression that you’re adept at technology, making an image file of your handwritten signature for electronic letters also sets you up for using it repeatedly to sign contracts and other documents electronically. If current labour trends take us to a predominant gig economy (Nazareth, 2017), having a shortcut for signing emailed contracts will save you time. Unless you’re sent a contract via DocuSign or an equivalent technology solution to legally sign documents in a secure manner, a PDF contract sent to you would otherwise require printing it out, signing it, scanning it, and emailing it back. With a signature image, you can just drag and drop your signature into the document after downloading it, re-save it as a PDF, and email it back to the employer in a minute or two.

Though the simulated signature is certainly easier to put together, it carries with it several problems: it looks lazy and even tacky, carries no legal authority, and may not appear as a simulated signature font when it’s opened by the recipient on another computer. If it’s opened on, say, a Mac computer when you wrote it on a Windows-based PC, the signature might be converted into 25-pt. Arial font, making the recipient wonder why you chose a font that looks nothing like handwriting for your signature. The reason is that the recipient’s computer didn’t have the signature font you chose, or something was lost in translation and your signature was rendered into a different font. For these reasons, using an image of your actual signature is better.

Return to the Letter Parts menu

8.3.11: Signature Block

The signature block clarifies the sender’s name in full, since handwritten signatures are rarely legible enough. The sender’s professional role follows the full name either on the same line (with a comma in between), if both the name and role are short enough, or on the second line if they are too long together. On the line below the sender’s name and role can appear the name of the company, followed on the next line by the sender’s work email address. All these lines are single-spaced. If you are writing independently, putting your email address and phone number on the line(s) after your printed name depends on whether or not you used a simple modified-block style address at the top. If you did, you should add your contact info to the signature block. If you used a personal letterhead, perhaps for a job application cover letter, then you need not include anything more than your full printed name in your signature block.

Sometimes letters are written on someone else’s behalf, perhaps by an administrative assistant. In such cases, the signature and typed-out name of the person responsible for the letter is given at the bottom, then the initials of the person who typed it appear after a line of space below the last line of the signature block.

Return to the Letter Parts menu

8.3.12: Enclosure Notice

Just as emails can include attachments, letters are often sent along with other documents. Cover letters introduce résumés, for instance, and letters of transmittal introduce reports to their intended recipients. In such cases, an enclosure notice on the very last line of the page (above the footer margin) tells the reader that another document or other documents are included with the letter. This would look like the following:

For other documents included with the letter, simple, brief titles such as Brochure or Thank-you Card would suffice. Separate each with a comma if you have more than one.

Return to the Letter Parts menu

8.3.13: Before Sending Your Letter

Given the importance of the letter you’re writing, especially if it has to do with employment, editing is crucial to your career success. Even a single writing error in a cover letter, for instance, is enough to prompt the reader to dump it in the shredder without even glancing at the enclosed résumé, making the applicant’s efforts useless. Apply revising and proofreading techniques to ensure that the letter fulfills its purpose and represents you well through its flawlessness.

Ensure also that your letter meets all expectations for standard business letter format. In North America, the page must be 8.5″ x 11″ (21.6 x 27.9cm) with one-inch (2.5cm) or 3cm margins all around. Though letterhead and graphic elements may go in the header and footer for company branding purposes, the side margins must remain blank. Make the font 12-point Times New Roman or a similar serif font, or alternatively a sans-serif font such as Arial, but definitely not something exotic like Papyrus . Single-space the text by ensuring that the line spacing is 1.0 in your word processor, which may be different from your word processor’s default (the MS Word default is 1.08). Adjusting the default setting that adds additional line spaces every time you hit the Enter or Return key is essential to avoiding the effect of the line spacing looking like it’s double even when you indeed set it to single.

Though letters sent electronically can be attached in emails or uploaded to a website, hard-copy letters must be printed out and signed. Those mailed on their own or perhaps with one or two enclosed pages can be folded twice to make three horizontal panels of equal height so that the letter fits in a standard 4 1/8″ x 9 1/2″ envelope. When a hard-copy letter covers extremely important documents (e.g., a mailed job application or report), consider sending them pristinely unfolded in a 9″ x 11.5″ envelope.

Finally, ensure that you leave enough time for your letter to arrive at its destination if punctuality is a factor. Though letters sent to a destination within your city may take only a couple of days to get there, those sent across the country may take a week or longer depending on weekend and holiday slow-downs (e.g., letters sent during the Christmas holiday season take longer to arrive). Email has largely replaced hard-copy letters because it ensures that a message gets to its destination the instant you press Send, so send letters when urgency isn’t an issue.